Price: ₹6,358.00 - ₹1,928.00
(as of Nov 25, 2022 09:00:59 UTC – Details)
3D-touch is a fully automatic universal 3D printer hot bed leveling probe (automatic leveling probe). Its advantages are simple, compact, high and good compatibility. It is compatible with all bed materials, such as glass metal. Wood plastic acrylic and so on.
Features:
1. Simple. 3Dtouch can be easily applied due to its small size and simple structure. Collecting information and firmware settings will be an easy task as 3dtouch works as an automatic bed leveling sensor as usual.
2. Smart. Self-test: Push the nail operation three times. Alarm: LED light flashes if a problem is found in the self-test or operation.
3. High precision: The standard deviation of the repeatable 3dtouch is about 0.005mm, which is accurate.
4. Innovative electromagnetic, super power saving. In the idle state, while the push is pulled out or retracted, there is no current flowing solenoid valve, the standby current of the whole device is lower than 15ma average. While in the working state, while the foot walks, suddenly up To about 100ms, the device that flows under 300ma. Low power consumption even further reduces Joule heating to prevent thermal problems.
5. Bed width selection: 3D Touch does not use any light, nor close to (inductor / capacitor) sensors. 3D Touch provides high through Hall effect control. Therefore, the bed material can be freely chosen.
6. Optimized structure: Larger size. 3D Touch is a technology intensive person. The build size can be set larger than other existing automatic bed level sensors.
Specifications:
Cable:
3D-touch Cable
Wiring 3Pin: Black ( -, GND)
Red (+5V)
Blue (control signal)
2PIN: Black ( -, GND)
Yellow (Zmin)
Package List:
1 x 3D-touch probe
2 x M2.5 screw
1 x M2.5 nut
1 x 2pin female to female 1m
1 x 3pin female to female 1m
1 x Screwdriver
1 x Connection Line
Note:
Some 3D printer motherboard
Innovative electromagnetic, super power saving. In the idle state, while the push is pulled out or retracted, there is no current flowing solenoid valve, the standby current of the whole device is lower than 15ma average. While in the working state, whil
Smart. Self-test: Push the nail operation three times. Alarm: LED light flashes if a problem is found in the self-test or operation.
Bed width selection: 3D Touch does not use any light, nor close to (inductor / capacitor) sensors. 3D Touch provides high through Hall effect control. Therefore, the bed material can be freely chosen.
Simple. 3Dtouch can be easily applied due to its small size and simple structure. Collecting information and firmware settings will be an easy task as 3dtouch works as an automatic bed leveling sensor as usual.
Warranty not applicable for this product
