Price: ₹10,299 - ₹6,656.00
(as of Dec 26, 2022 22:18:49 UTC – Details)
Product Description
Product Description:
DentX 104 series is photopolymer resin series intended for Dental prototype 3D printing. The printed parts exhibit excellent structural and surface properties. Additionally, they are considerably easy to finish and polish using standard surface treatment methods. The rheology characteristics of DentX 104 series provides stable and consistent performance on most DLP and SLA 3D printing machines.
Excellent hardnessExcellent surface propertiesExcellent printability on most 3D printing machinesEasy to finish and polishExcellent compatibility with silicone encapsulant systemsAvailable in a wide range of coloursNon-cytotoxic and Non-mutagenic
3idea Photopolymer Resin
3IDEA DentX 104 series is photopolymer resin series intended for Dental prototype 3D printing.
DentX 104 series resins can be cleaned up with IP Alcohol or other UV blanket
3idea Photopolymer Resin – DentX Series
Properties
Cured Photopolymer
Flexural Strength : > 21 MPaElongation : 8 – 10%Sorption : < 40 ug/mm3Solubility : < 11 ug/mm3Shrinkage : < 0.3-0.5%Hardness: 85 Shore DBiocompatibility: Non-cytotoxic, non-mutagenic and non-sensitizing
Uncured Resin
Viscous colored fluid Viscosity 110 mPa⋅s ± 5% at NTP Density 1058 Kg/m3 ± 1% at NTP Odor Moderate Acrylic Odor Solids content > 99.9 wt% Curing spectrum 365 – 405 nm Curing time 5 – 10 secs
Features:
High Precision
Fine detailed print to meet variety of complex designs
Rapid Curing
Low Shrinkage, Fast Curing, No Deformation
Low Odour
The resin emits low odour than any other resin in the market
Rigid & Tough
LCD Resin balances the line between staying rigid and tough
The rheology characteristics of DentX 104 series provides stable and consistent performance on most DLP and SLA 3D printing machines.
Excellent compatibility with silicone encapsulant systems. Non-cytotoxic and Non-mutagenic
DentX 104 series resins can be cleaned up with IP Alcohol or other environmentally friendly UV blanket washes. Printing equipment should be cleaned before and after use.
The product can be stored and handled in stainless steel, dark glass or black plastic containers. This product should be stored in a sealed container, away from heat exceeding 40? C, in a well-ventilated area and should not be exposed to any direct light source.
