Price: ₹82,206 - ₹49,324.00
(as of Jan 03, 2023 15:42:54 UTC – Details)
/> Inner diameter of Air Pipe: 7.5mm (recommended to use 30L/min, 0.03Mpa air compressor, out diameter of nozzle:8mm)
Laser Wavelength: 455±5nm
Laser Type and Fixed Focus: fixed focus, fixed focus through 50mm measuring column
Laser Shell Material: aluminum alloy
Laser circuit board
Circuit Board Size: 40*40mm
Circuit Board:12V/PWM modulation board
Input voltage: 12V
Max Input of module:12V 5A
Wire Rod:HY2.0, 3Pin terminal (3-core cable, A: PWM +, B: GND, C: VCC ).
Fan:12V 0.15A 4020 fan
Fan speed: 15000 rpm
Operating temperature: -20 ℃ to 70 ℃
Package Weight: 0.6kg/21.1oz
Package Size: 305x150x125mm/12×5.9×4.9in
Note:
How to judge whether the S30 Pro is suitable for use? You need to pay attention that the input voltage of the S30 Pro is 12V, and the S30 Pro is a 3pin interface, you can check the detailed pictures.
● Because of the powerful of S30 Pro, it is forbidden to run the engraving machine unattended. Pause it if you're not around.
● For detailed machine instructions, please refer to the manual for parameter settings.
● When operating the engraving machine, please install the protective cover; if it is not installed, you need to wear goggles.
● Do not touch the with your hands, otherwise you may burn your hands.
● Please avoid b impact on the machine.
● It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended.
● Do not use the directly on any specular reflection object, which may cause injury to the operator or burn the.
Packing List:
1 x 7.5mm inner diameter air tube
1 x acrylic protective cover
1 x S30 Pro head
1 x Multi-function connector
1 x 50mm measuring column
1 x Screw and tool kit
💭[🔝 Ultra-fine and high-density 10W shaping technology: The power of S30 Pro is increased to 10W, which is twice that of S9. But getting the same 0.08mm focus ultra-fine beam as the S9 means that the S30 Pro has higher energy density, stronger cutting penetration and engraving capabilities.
💭[🔝 Powerful High-Speed Air Assist: S30 Pro is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance.
💭[🔝 Detachable eye shield: Equipped with a detachable eye shield, which will not dazzle even without glasses. Also, if you don’t need it, you can easily disassemble it.
💭[🔝 Stronger&Cleaner: Combining advanced high-speed air assist and 10W high-energy density, many high-density woods such as can be cut; And the cutting surface is cleaner with powerful airflow blows away the residue, free of any stains.
Warranty not applicable for this product
