Price: ₹12,250.00 - ₹10,499.00
(as of Sep 09, 2021 13:42:40 UTC – Details)
From the manufacturer
Specifications
Acoustic Principle: Line Gradient
Active Electronics: JFET impedance converter
Capsule: 0.50″
Polar Pattern: Supercardioid
Address Type: End
Frequency Range: 40Hz – 20kHz
Output Impedance: 200Ω
Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted): 20dB-A
Power Options: 9v battery powered
Weight: 176.00gm
Dimensions: 65.00mmH x 102.00mmW x 250.00mmD
Output: minijack / 3.5 mm
Warranty: 1 year with free extension to 10 years following registration
Rode VideoMic
Directional On-Camera Microphone
The RØDE VideoMic is a professional grade 1/2 inch condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.
The integrated Rycote Lyre based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Its standard sized shoe mount also includes a 3/8 inch thread in the base for easy mounting on a boom pole or stand. By employing a super-cardioid polar pattern, the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimizing any surrounding sounds.
In addition to the microphone’s native 40Hz-20kHz response, a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.
The RØDE VideoMic directional on-camera microphone is designed in Australia and covered by RØDE Microphones’ industry leading 10 year warranty.
Studio recording quality
Super-cardioid polar pattern
Integrated Rycote Lyre shock mounting
Two step High Pass Filter (Flat/80Hz)
Three step PAD (0, -10, -20dB)
Rugged reinforced ABS construction
Windshield included
3.5mm mini-jack output
Integrated cold-shoe mount (3/8” thread)
RØDE VideoMic with Rycote Lyre Pack
Which VideoMic Are You?
Ideal For:
Smartphones
Camcorders, point and shoot, entry level DSLR
Camcorders, point & shoot, entry-level DSLR (Not compatible with Nikon D7000)
Camcorders, mid-range DSLR
Camcorders, mid-range DSLR
High-end DSLR, Full frame cameras
Scenarios:
Dialogue to camera, interview, movies
Dialogue to camera, interview, sports, music
Interview, dialogue to camera, sporting events, ambient audio, music
Interview, dialogue to camera
Interview, dialogue to camera
Interview, dialogue to camera, sporting events
Included Accessories:
Deluxe furry windshield
Deluxe furry windshield, 3.5mm TRS patch cable, Lyre shoe mount
Windshield, 3.5mm TRS patch cable
Windshield
Windshield, Boom Pole, Mic screw adaptor, Headphone extension cable (25′)
Windshield
Output:
Mono (same output to Left and Right)
Mono (same output to Left and Right)
Mono (same output to Left and Right)
Mono (same output to Left and Right)
Mono (same output to Left and Right)
Mono (same output to Left and Right)
Power:
Supplied by device
Supplied by device
Supplied by camera
9V battery
9V battery
9V battery
Frequency Response:
100Hz – 20kHz
100Hz – 20kHz
100Hz – 16kHz
40Hz – 20kHz
40Hz – 20kHz
40Hz – 20kHz
High Pass Filter:
None
None
None
80Hz
80Hz
80Hz
Level Switch:
None
None
None
-20dB, -10dB
-20dB, -10dB
-10dB, +20dB
Rugged reinforced ABS construction
Two step high-pass filter – flat or 80 Hz
Integrated shock mount
9 V battery operation
